Atlantic 3D Printing, Bon3 and Urbapaz podium of the Sea of Maeloc Rías Alta

Atlantic 3D Printing, Bon3 and Urbapaz podium of the Sea of Maeloc Rías Alta

Nautica Digital Europe Sports Highlights Sailing

Photo with TV from the beginning of the last stage against Malpica-1 (Photo Maria Devesa)

Atlantic 3D printing with Guillermo Blanco to the reed of the Real Club Nautico de La Coruña, was proclaimed on the afternoon of the winning Sunday of the Regata Mar de Maeloc Rías Alta, tied to points with the Bon3 of Victor Carrión of the Club Nautico Punta Lagoa. The victory was falling on the side of the Herculin totas he had achieved in the four sleeves two first... while the olivics only achieved a first partial position.

The stage of the four-eighth edition of the Rías Alta had very unstable weather conditions: winds of 5 to 7 knots, of components north, west, south-west and north-west... which greatly damaged the development of the test to La Coruña... a manga in which the winner in real time and compensated, was the UrbáPaz of José Francisco Edreira, which was useful to reach the third place in the general (after Impression and the Bon3 vigués), and the first in its category, at the detriment of the Vigués of the Club of the Marítima, which was the major promise of the Canal of the "Alcala" (").

After the ship of Edreira, also regatta of the Bodegas Benito Santos of Jorge Etchevarría, being the third the Bon3, who managed to put a ship in the leader... the Sadamar Alma do Mar, but that was insufficient to get the absolute victory. The Bon3 in addition to its second post, was clearly imposed at its level. Finally, among those of minor length, the victory of the ship of Guillermo Blanco, ahead of the Mascato of Enrique Vilariño Jr... who, like the so-called young Orensian patron Pérez Canal, is another of the promises of the Vela Gallega.

Vigo Bon3's crew celebrating its victory in its class and the silver in the general (Photo Maria Devesa)

And for Tuesday at 12: 00 in the morning, at the facilities of the Royal Nautical Club of Vigo, in its outer area, by the Covid 19... official presentation of the Sea of Maeloc Rías Baixas... which will have a spectacular participation figure above the 70 ships.

On the other hand next Friday begins in La Coruña, the Finisterre Trophy, which within the Regatas Mar de Maeloc, joins the cities of La Coruña and Vigo, which is by the way the second longest race in Spain (after the Xacobeo 21-22 of this Circuit, between Getxo and La Coruña), with its 120 miles.

_
Top Ten General Final

1st Atlantic 3D Printing, Guillermo Blanco (RCN La Coruña), 9
2nd Bon 3, Victor Carrión (CNPL Vigo), 9
3rd Urbapaz, Francisco Edreira (CM La Penela), 17
4th Sadamar Alma do Mar, Nito Enriquez (CM La Penela), 19
5th Bosch Service Solutions, Ramón Ojea-A.Pérez Canal (CMC Vigo), 19
6th Bodegas Benito Santos, Jorge Etcheverría (CN Sada), 25
7th Raygrass III, José Antonio Núñez (CNC Corcubión), 27
8th Lambaix, Antonio Ríos (CN Sada), 27
9th Gómez Mostly, Andrés Soto (RCN La Coruña), 30
10th Eleko-Mambo, Carlos Sampedro Curbera (CM La Penela), 39

2021 / 07 / 31: 3D Atlantic and Bon3 printing are played in the Malpica- La Coruña la Maeloc Rías Alta

Bon3, Bodegas Benito Santos and Bosch Service Solutions in Vilano (Photo Maria Devesa)

The effect of the Atlantic 3D Printing by Guillermo Blanco of the Real Club Nautico de La Coruña and the Bon3 of Victor Carrión of the Club Náutico Punta Lagoa de Vigo in Malpica, which continue without failure in the Regata Mar de Maeloc Rías Altas, which this Friday has already completed three stages of the four of its programming, in which the classic herculin is notable for the Spanish Championship of Height of the Real Federation of Spanish Vela.

Bodegas Benito Santos in Cabo Vilano (Photo by Maria Devesa)

The third manga was presumed to be decisive: with about 30 miles between the ports of the Costa da Morte de Muxía and Malpica. And it was because the foreseeable thing was that the Atlantic 3D Printing, suffered a lot in the climb to La Coruña, with the forced passage through Cape Vilano and the Sisargas islands. And the Herculine ship did not fail, as did the J109 Bon3, which took the first two squares: they will play the victory... but to win the vineyard (which is 2 points away) needs Guillermo Blanco's ship, to stay two points from Victor Carrión... a victory simply does not reach Punta Lagoa.

Raygrass III sailing at the mythical Sanctuary of the Virxen da Barca (Photo Maria Devesa)

The wind conditions between Muxia and Malpica did not honor the name of this part of the coast of Galicia: To Costa da Morte... because the wind was roll to the satiety and closer to the calm chicha, than of the eight knots of the south-west, which was the maximum impetus of the wind.

He arrived in real time from first to Malpica the Bon3 with a chrono of 05.31.17, which was sufficient to achieve also the victory in compensation. After the Viguese the Atlantic 3D Impression, being the third the Urbapaz of Edreira, fourth the Lambaix of Ríos, fifth the Gómez Mostly of Andrés Soto... being sixth also the Vigués Bosch Service Solutions of Ramón Ojea with the young Orensian patron Alex Pérez Canal, who lost all the options to renew his victory of 2020.

The fleet leaves behind the magic of Muxia (Photo Maria Devesa)

As it closes at 12: 00 in the morning the second shortest stage, between Malpica and La Coruña with just over 22 miles and beginning at 12: 00, in front of the hatch of the Coruñesa marinera. The closure at nine o'clock at the Nautico de La Coruña.

_
Top Ten General after 3rd Stage

1st Atlantic 3D Printing, Guillermo Blanco (RCN La Coruña), 4
2nd Bon 3, Victor Carrión (CNPL Vigo), 6
3rd Bosch Service Solutions, Ramón Ojea-A.Pérez Canal (CMC Vigo), 13
4th Sadamar Alma do Mar, Nito Enriquez (CM La Penela), 15
5th Urbapaz, Francisco Edreira (CM La Penela), 16
6th Lambaix, Antonio Ríos (CN Sada), 19
7th Gómez Mostly, Andrés Soto (RCN La Coruña), 23
8th Bodegas Benito Santos, Jorge Etcheverría (CN Sada), 23
9th Raygrass III, José Antonio Núñez (CNC Corcubión), 26
10th Eleko-Mambo, Carlos Sampedro Curbera (CM La Penela), 28

2021-07-30: Vilano and the Sisargas will deliver judgment in the Sea of Maeloc Rías Alta

A moment of departure in Laxe (Photo Maria Devesa)

All the same in the Regata Mar de Maeloc Rías Altas, the wind conditions are favoring the ships of less handicap, so after the second stage held with loose winds of the north component, the Atlantic 3D Impression of the Nautico de La Coruña, repeated the victory of the first delivery, and is more leader of the general... but that, yes, with three ships step on their heels: the Vigues Bon 3 of Victor Carrión of the Club Nautico Punta Lagoa and the Bosch Service Solutions of the Maritime of Canido de Ramón Ojdito, with a young of the Sea of the Sage with a... Bon has 5 points and the other two seven.

Six-knot winds in Laxe, with four off-line ships... returning, so they disqualified their possible disqualification: Lambaix, Eleko-Mambo, Fran Edreira's Urbapaz and the leader, the Atlantic 3D Printing. The conditions, in which it was the shortest stage of this Rías, had a length of just under 16 miles, imposed in real time the Gómez Mostly, the cousin 38 of Andrés Soto, that is with Bon3 of Victor Carrión very close to him. The Coruñeses achieved a chrono of 01-57-13 and the vines crossed the line of reach, opposite the Muxia hatch just 01.13.

Raygrass III of the Cabrumeiro de Corcubión Nautical Club (Photo Maria Devesa)

In any case the legendary Promontorius Corus for the Romans... is Cape Vilano along with the Sisargas Islands, already very close to Malpica, in the middle of the Death Coast; they will have the last word... with a stage of about 30 miles, which will begin at 12: 00.

_
Top Ten General after 2nd Stage

1st Atlantic 3D Printing, Guillermo Blanco (RCN La Coruña), 2
2nd Bon 3, Victor Carrión (CNPL Vigo), 5
3rd Sadamar Alma do Mar, Nito Enriquez (CM La Penela), 7
4th Bosch Service Solutions, Ramón Ojea-A.Pérez Canal (CMC Vigo), 7
5th Raygrass III, José Antonio Núñez (CNC Corcubión), 10
6th Urbapaz, Francisco Edreira (CM La Penela), 13
7th Lambaix, Antonio Ríos (CN Sada), 15
8th Bodegas Benito Santos, Jorge Etcheverría (CN Sada), 16
9th Gómez Mostly, Andrés Soto (RCN La Coruña), 18
10th Eleko-Mambo, Carlos Sampedro Curbera (CM La Penela), 19

2021-07-29: Atlantic 3D printing wins in Laxe and leads the Sea of Maeloc Rías Altas... and tomorrow to Muxia

The Bosch Service Solutions reaching the beacon of the Guisanda (Photo Pedro Seoane)

The Atlantic 3D Printing Patroned by Guillermo Blanco, is the leader of the Regata Mar de Maeloc Rías Altas, after the first stage, held between the ports of La Coruña and Laxe, already very close to the legendary Cabo Finisterre to the south of the Herculina province, and with a distance close to 40 miles has opened this classic regatta, which on its 48 birthday, is punctuable for the Spanish Championship of Vela de Altura.

The urban exit from the very center of La Coruña, was again a year of colorful spectacle... with the wind spinnaker, which blew from the northwest with a 10 knots. From there the fleet went to the south mouth of the river of La Coruña, passing to the foot of the Tower of Hercules and going already to leave the Port Exterior and to enter the Costa de la Muerte... which on Thursday July did not honor its name, because the conditions of wind and sea, were excellent, it was pity that at the end the wind fell to the six or seven knots already with Laxe in sight.

The very young crew of the Bosch Service Solutions in the access to the Nautico de La Coruña (Photo Pedro Seoane)

The winner in real time was one of the Viguese ships that are competing: the Bon 3 of the Punta Lagoa Nautical Club, the J109 of Victor Carrión, which has as tactical to the Boucense Juan Pazó... one of the best Galician sailors of recent years. The frankly good weather: 05.48.03.

Among the cruises of the class of major length, the 0-1 the winner in compensation was the Bosch Service Solutions with the Vigués Ramón Ojea in command, and that has as cane the Orensano Alejandro Pérez Canal. Behind the Urbapaz of Francisco Edreira, Eleko Mambo with a pitcher like Carlos Sampedro, the precious Sun Fast 3600 of Antonio Ríos... the Lambaix, being the fifth to win in the Getxo Regata - La Coruña: the Prima 38 of Andres Soto, the Gómez Mostly.

The fleet through the Castle of San Antón (Photo Pedro Seoane)

Among the 2-3, lead for Nito Enriquez with his Sadamar-Alma do Mar, second is the aforementioned Bon 3, which is ahead of his twin the Bodegas Benito Santos with Etcheverría a la rea (which was fourth) and the powerful Raygrass III of the Nautical Club Carrumeiro de Corcubión, one of the favorites with José Antonio Núñez a la rea... who placed third in his class.

The support that La Cruz Roja del Mar, in its Laxe base, provided to the competition, at the level of security... as well as to the media displaced to this Coruñesa villa, by welcoming us in its magnificent and modern facilities of the Port of Laxe, by José Manuel Barcia Mira.

For Friday at 12: 00 in the morning, second stage with a 17-mile route between Laxe and Muxia, the shortest of this Sea Regata of Maeloc Rías Altas.

_
Top Ten General after 1st Stage

1st Atlantic 3D Printing, Guillermo Blanco (RCN La Coruña)
2nd Sadamar Alma do Mar, Nito Enriquez (CM La Penela)
3rd Bon 3, Victor Carrión (CNPL Vigo)
4th Bosch Service Solutions, Ramón Ojea-A.Pérez Canal (CMC Vigo)
5th Urbapaz, Francisco Edreira (CM La Penela)
6th Raygrass III, José Antonio Núñez (CNC Corcubión)
7th Bodegas Benito Santos, Jorge Etcheverría (RCN La Coruña)
8th Eleko-Mambo, Carlos Sampedro Curbera (CM La Penela)
9th Lambaix, Antonio Ríos (CN Sada)
10th Mascato, Enrique Vilariño (RCN La Coruña)

2021 / 07 / 28: The Sea of Maeloc is beginning in La Coruña.

Lambaix and Mascato through the Castle of San Antón (Photo Pedro Seoane)

On the part of the northern area stands the presence of the winner of the recently celebrated Getxo-La Coruña, of the Sea of Maeloc Xacobeo 21.22: Gómez Mostly, the Prime 38 of Andrés Soto... which will be a bone for the Vigo units.

The Bodegas Benito Santos of Jorge Etchevarría Mazaira, of the best ships of the Nautico de La Coruña, as well as the UrbáPaz of Francisco Edreira (which competes for La Penela) and the beautiful Sun Fast 3600 Lambaix of Antonio of the Nautico Club of Sada, will also be in the race.

Sadamar-Alma do Mar de Nito Enriquez is another of the cruises that count for absolute victory.

There will be another boat with a spectacular bottle: Eleko-Mambo, which has as a cane the vineyard Carlos Sampedro... as well as the boat of the Nautical Club Carrumeiro de Corcubión: Raygrass III of Pablo Miranda, which won last year in the cruise race of the Abanca Week: the Divine Regata Rei that was held in the waters of the river of Betanzos, in Sada.

3D Atlantic, Mascato, Golfiño, Bastiagueiro, Villano and La Galera printing are other units that have their possibilities, outside the elite group of the 36-39 feet.

It is therefore of true luxury, many ships... and among them the best Galician units between the 36 and 39 feet, of uncertain prognosis... in which it is the second act of Mar de Maeloc, which will be completed in its version 2021 with the Finisterre Trophy which is the second longest race in Spain this season with its 120 miles, and the Regata de las Rias Baixas already between 10 and 14 August, which will reach the maximum participation, set in 80 ships, of the hand of the Real Club Nautico de Vigo.